http:\/\/yokohamabeer.com\/<\/a>) \u2013 they were kind enough to let us use their mill on the morning of our first brew day!
\nA Huge thank you to the people at Yokohama Brewery, they made our first brew possible!<\/p>\nAfter we had our Brewing water up to the temperature that we wanted, it was time to mix it with the crushed malt \u2013 which is known as \u2018mashing in\u2019 by brewers. The mash then is left until all the starch has been converted.<\/p>\nngg_shortcode_1_placeholder\n
The mash is then sent to a different vessel \u2013 known as a Lauter Tun.<\/p>\nngg_shortcode_2_placeholder\n
The job of the Lauter Tun is to separate the grain from the sweet sugary liquid known as \u2018wort\u2019 \u2013 the wort needs to be collected and boiled in a separate vessel (known as a Brew Kettle).<\/p>\nngg_shortcode_3_placeholder\n
We had some problems using our Lauter Tun for the first time.
\nIt is always a challenge for a brewer to use new equipment for the first time, but we managed to eventually get the brew finished with no effect on the quality.<\/p>\n
The wort is then boiled and hops are added. Hops boiled for a long time give bitterness to the beer and hops that are boiled for a short time give the beer its hop aroma.
\nIt is the skill of the brewer to perfectly balance the malt with the hops to give the beer great flavour as well as making it easy to drink.
\nThe choice of yeast also plays a vital role in the beer\u2019s outcome.<\/p>\nngg_shortcode_4_placeholder\n
We also had a problem with our brewing kettle, which meant it took a very long time for the wort to start boiling. It is very important that the brewer gets a very strong boil when making beer \u2013 so waiting for the wort to boil meant that we had a very long day for our first brew.
\nThe problem has since been fixed and the second brew was much quicker.<\/p>\n
After the boil, the beer is sent from the Brew Kettle to another vessel called a Whirlpool \u2013 this separates the beer from the hops and extra protein in the beer.
\nIt is important for fermentation that most of these are removed from the beer.<\/p>\nngg_shortcode_5_placeholder\n
The beer is then passed through a heat exchanger to cool it down to a temperature that it can be fermented at.
\nThe temperature at which each beer ferments at is carefully chosen by the brewer, depending on which characteristics they wish to achieve from the yeast.
\nTemperature is extremely important, because the yeast has to be at a specific temperature for a good fermentation \u2013 Too low a temperature and there will be no fermentation, too high a temperature and the yeast will de-nature and be unable to ferment.
\nFermentation takes place in the Fermentation Vessels after cooling.<\/p>\nngg_shortcode_6_placeholder\n
Yeast is added to the Fermentation Vessels, where some of the malt sugars will be converted to carbon dioxide and alcohol.
\nOther than the obvious production of alcohol, the beer will become less sweet and less bitter during fermentation \u2013 beer prior to fermentation is actually not very nice to taste.<\/p>\n
We were extremely happy when the transfer\/cooling process was finished!
\nWe had worked a 17 hour day and had to overcome so many problems, but thanks to having a good brewing team \u2013 we were proud with what we had created.<\/p>\nngg_shortcode_7_placeholder\n
We hope our second batch of Pale Ale to be even better as we modify the recipes, learn the best ways to use our equipment and get the most out of our beers.<\/p>\n
Samples were taken in order to check the gravity of the beer, which lets the brewer know how the fermentation is progressing.
\nOnce the beer gravity is at the level that we want, we close the tanks up in order to naturally carbonate the beer \u2013 which provides smaller and smoother bubbles than artificial carbonation.
\nCooling is then applied to the tanks in order for the yeast to drop, making the beer clearer.
\nIt also helps the carbonation to absorb into the beer and flavours to mature \u2013 as well as make the beer more stable, and less likely to suffer from infection.<\/p>\n
Our First batch is almost ready to leave the brewery and enter your glasses!<\/p>\n
Contact us now for a quote and to put your name on the list for pre-orders of our first batch of Draught Pale Ale \u2013 Our Porter will also be ready soon!<\/p>\n
ngg_shortcode_8_placeholder
\nngg_shortcode_9_placeholder
\nngg_shortcode_10_placeholder
\nngg_shortcode_11_placeholder
\nngg_shortcode_12_placeholder<\/p>","protected":false},"excerpt":{"rendered":"
After a lengthy application process with the Tax office, we finally received our license for beer brewing in late February. It was decided in advance that the first brew had to be Pale Ale! Pale Ale has become an absolute must for most Ale breweries, so it seemed the obvious choice for our maiden voyage. Although we already had our license, there was still a little engineering work to be done so that the brewery was in perfect working order. Also there a lot of thinking to be done about how we would tackle the first brew with achieving the highest quality possible. We decided on Wednesday 7th of March […]<\/p>\n","protected":false},"author":3,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"ngg_post_thumbnail":0,"footnotes":""},"categories":[6],"tags":[],"class_list":["post-442","post","type-post","status-publish","format-standard","hentry","category-news"],"acf":[],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/www.brimmerbrewing.com\/en\/wp-json\/wp\/v2\/posts\/442","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.brimmerbrewing.com\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.brimmerbrewing.com\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.brimmerbrewing.com\/en\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/www.brimmerbrewing.com\/en\/wp-json\/wp\/v2\/comments?post=442"}],"version-history":[{"count":0,"href":"https:\/\/www.brimmerbrewing.com\/en\/wp-json\/wp\/v2\/posts\/442\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.brimmerbrewing.com\/en\/wp-json\/wp\/v2\/media?parent=442"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.brimmerbrewing.com\/en\/wp-json\/wp\/v2\/categories?post=442"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.brimmerbrewing.com\/en\/wp-json\/wp\/v2\/tags?post=442"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}